Discussion about software such as GSAK, OziExplorer etc, as well as all things hardware, GPSrs, laptops, PDAs, paperless caching, cables etc
-
Chasburgs
- Posts: 22
- Joined: 23 August 15 4:31 pm
- Location: Woodside, SA
Post
by Chasburgs » 15 September 15 6:14 pm
Ok, I have Geosphere showing GC and GCA caches. Ideally, I'd like GCA only but haven't worked that out yet.
However, how do I get the bloody app to see where I am, when I'm out in the field? I've turned on locations in my iphone settings. Really, this is making it hard to cache the GCA ones
![Sad :(](./images/smilies/icon_sad.gif)
-
Richary
- 8000 or more caches found
![8000 or more caches found 8000 or more caches found](./images/ranks/8000star.png)
- Posts: 4189
- Joined: 04 February 04 10:55 pm
- Location: Waitara, Sydney
Post
by Richary » 15 September 15 7:01 pm
Hmmm, just looked at the filters in Geosphere and I can't see a Source option - which is what I use in GSAK to filter from only one site.
As for not showing where you are - are any location services working on other apps? I had the problem a while ago on my iPhone and from memory it required power cycling.
-
Tyreless
- 800 or more hollow logs searched
![800 or more hollow logs searched 800 or more hollow logs searched](./images/ranks/800star.gif)
- Posts: 81
- Joined: 12 March 13 4:21 pm
- Location: Sydney
Post
by Tyreless » 16 September 15 9:30 am
I created a Group called GCA. When I import a gpx with GCA caches I put it into the GCA group. I can then filter only for this group.
-
MavEtJu
- Posts: 486
- Joined: 07 January 15 9:15 pm
- Location: Caringbah
-
Contact:
Post
by MavEtJu » 16 September 15 9:47 am
Chasburgs wrote:Ok, I have Geosphere showing GC and GCA caches. Ideally, I'd like GCA only but haven't worked that out yet.
However, how do I get the bloody app to see where I am, when I'm out in the field? I've turned on locations in my iphone settings. Really, this is making it hard to cache the GCA ones
![Sad :(](./images/smilies/icon_sad.gif)
When you import the GPX files, you are asked to put them in the right group.
So I have (at least) two groups, one called "GCA - NSW" and one called "Groundspeak - NSW".
In the offline caches tab, go to the filter and select only the "GCA- NSW" group.
> However, how do I get the bloody app to see where I am, when I'm out in the field?
That question doesn't make sense without a little bit more information.
Edwin
-
Chasburgs
- Posts: 22
- Joined: 23 August 15 4:31 pm
- Location: Woodside, SA
Post
by Chasburgs » 16 September 15 9:58 am
Other apps are working with location yes. Including other caching apps.
What I mean is when you go into caches online, the app always thinks I'm at home and starting from there, it's not picking up that I am elsewhere so when I click on a cache it says for instance 4.1km when in fact it's only 100m away.
Will have a play with the group bit and see if that helps. Thanks guys.
-
MavEtJu
- Posts: 486
- Joined: 07 January 15 9:15 pm
- Location: Caringbah
-
Contact:
Post
by MavEtJu » 17 September 15 11:25 am
Chasburgs wrote:Other apps are working with location yes. Including other caching apps.
What I mean is when you go into caches online, the app always thinks I'm at home and starting from there, it's not picking up that I am elsewhere so when I click on a cache it says for instance 4.1km when in fact it's only 100m away.
Tap on the pointy arrow "button" at the bottom, that will bring it to where you are.
Edwin
-
biggles1024
- 2500 or more caches found
![2500 or more caches found 2500 or more caches found](./images/ranks/2500star.gif)
- Posts: 99
- Joined: 15 June 12 9:42 am
- Location: SE Melbourne
Post
by biggles1024 » 18 September 15 5:52 pm
Check that you haven't accidentally turned GPS off from within Geosphere. Open Geosphere, then tap the Grid icon in the top, left-hand side of the screen. In the bottom, right-hand corner of the window that will then appear, you will see a set of vertical bars with a satellite icon sitting just over them. If those bars aren't coloured green and have a red circle with a red line through it, the phone's GPS has been turned off. Just tap that icon to turn it back on.
-
MavEtJu
- Posts: 486
- Joined: 07 January 15 9:15 pm
- Location: Caringbah
-
Contact:
Post
by MavEtJu » 18 September 15 9:40 pm
biggles1024 wrote:Check that you haven't accidentally turned GPS off from within Geosphere. Open Geosphere, then tap the Grid icon in the top, left-hand side of the screen. In the bottom, right-hand corner of the window that will then appear, you will see a set of vertical bars with a satellite icon sitting just over them. If those bars aren't coloured green and have a red circle with a red line through it, the phone's GPS has been turned off. Just tap that icon to turn it back on.
I nominate that for the stupidest feature of Geosphere.
![Image](http://i.imgur.com/LSZHttd.png)
-
biggles1024
- 2500 or more caches found
![2500 or more caches found 2500 or more caches found](./images/ranks/2500star.gif)
- Posts: 99
- Joined: 15 June 12 9:42 am
- Location: SE Melbourne
Post
by biggles1024 » 19 September 15 12:08 am
Team MavEtJu wrote:biggles1024 wrote:Check that you haven't accidentally turned GPS off from within Geosphere. Open Geosphere, then tap the Grid icon in the top, left-hand side of the screen. In the bottom, right-hand corner of the window that will then appear, you will see a set of vertical bars with a satellite icon sitting just over them. If those bars aren't coloured green and have a red circle with a red line through it, the phone's GPS has been turned off. Just tap that icon to turn it back on.
I nominate that for the stupidest feature of Geosphere.
Its actually very handy for conserving the battery. Know how to use your tools to your best advantage and there are no problems.
-
Richary
- 8000 or more caches found
![8000 or more caches found 8000 or more caches found](./images/ranks/8000star.png)
- Posts: 4189
- Joined: 04 February 04 10:55 pm
- Location: Waitara, Sydney
Post
by Richary » 19 September 15 6:42 pm
I suppose it could be useful if you find using a GPS, and just use Geosphere to look at the listing details and logs. Otherwise it seems strange
![Whistle :-"](./images/smilies/eusa_whistle.gif)