Please change virtual to trig

Discussion about the Geocaching Australia web site
Post Reply
User avatar
SamWalkers
900 answers to the unknown mysteries of life
900 answers to the unknown mysteries of life
Posts: 228
Joined: 30 April 09 12:57 pm
Location: CANBERRA

Please change virtual to trig

Post by SamWalkers » 28 June 13 1:10 am

I have just published ga5962.
It should be a trig point but for some reason the drop down menu does not include Trig.
It could be something to do with I have taken a while to get this one out and had it stored as an unpublished trad.

Can you please trig it.

User avatar
caughtatwork
Posts: 17015
Joined: 17 May 04 12:11 pm
Location: Melbourne
Contact:

Re: Please change virtual to trig

Post by caughtatwork » 28 June 13 9:20 am

No can do. TP's have a TP prefix. That can't be changed from the GA code.
I'd recommend an archive (or unpublished log), save the code for later and list a new TP type.

User avatar
SamWalkers
900 answers to the unknown mysteries of life
900 answers to the unknown mysteries of life
Posts: 228
Joined: 30 April 09 12:57 pm
Location: CANBERRA

Re: Please change virtual to trig

Post by SamWalkers » 28 June 13 10:33 am

All done.
I think I have been caught like that before but worked it out.

Am I correct in thinking that there is no way to save a TP in draft? That a TP publishes when it is saved?
That would be to do with ownership of a trig cache remains with GCA.

Post Reply