What's the difference between a trig point and a survey mark
-
- 10000 or more caches found
- Posts: 389
- Joined: 07 October 12 1:59 am
- Location: Canberra
What's the difference between a trig point and a survey mark
Surely they both involve surveying. They both have metal plaques on the ground and posts.
- caughtatwork
- Posts: 17025
- Joined: 17 May 04 12:11 pm
- Location: Melbourne
- Contact:
Re: What's the difference between a trig point and a survey mark
TrigPoints were used to survey Australia back in the 1970's. There were limited numbers. They were generally a marker with a deice on top so you could see them from a long distance.
https://en.wikipedia.org/wiki/Triangula ... #Australia
Survey markers are used everyday to map areas.
Not much difference except that a TP is not a SM and we don't list SM's separately.
https://en.wikipedia.org/wiki/Triangula ... #Australia
Survey markers are used everyday to map areas.
Not much difference except that a TP is not a SM and we don't list SM's separately.
- ziggiau
- 3000 or more caches found
- Posts: 825
- Joined: 26 September 14 11:13 pm
- Twitter: ziggiau
- Location: Sydney, Australia
Re: What's the difference between a trig point and a survey mark
Having recently become accustomed to looking downwards to find survey markers everywhere (or consulting SIX Maps to go find them specifically), when logging them and reviewing their placement on the map, it's taking quite some time to load due to the numbers logged. Would their be any rationale in splitting survey marker locationless caches up into regions to be able to handle the volume or is that just asking for trouble?
- spatialriq
- 5500 or more caches found
- Posts: 326
- Joined: 12 May 11 11:52 pm
- Location: Perth
Re: What's the difference between a trig point and a survey mark
At C@W says, Trig points are kind of from a previous era. With the advent of GPS and modern theodolites (total stations) it's all SSM's (Standard Survey Marks) now as line-of-sight isn't as important as it used to be. With differential GPS (2 GPS receivers, 1 set up on a known point, and 1 where-ever you like) you can accurately map to centimetre level these days.
Trust me, I'm a Surveyor!
Trust me, I'm a Surveyor!
- Chwiliwr
- 10000 or more caches found
- Posts: 900
- Joined: 10 April 05 10:39 pm
- Location: Leeming Western Australia
Re: What's the difference between a trig point and a survey mark
In WA most trig points are disguised as State Survey Marks so apart from where an actual trig mast is present and because they appear to be recorded with the same ID in the government database I have been identifying them from the trig markings on the older topographical maps that I got access to.Goldenwattle wrote:Surely they both involve surveying. They both have metal plaques on the ground and posts.
Around the Perth metropolitan area most of the old trig points have disappeared or are now on private property. I have also been finding that a significant number of country trig points are in the middle of farms so not accessible.
- ziggiau
- 3000 or more caches found
- Posts: 825
- Joined: 26 September 14 11:13 pm
- Twitter: ziggiau
- Location: Sydney, Australia
Re: What's the difference between a trig point and a survey mark
So does that mean there will never been any new trig points placed?spatialriq wrote:At C@W says, Trig points are kind of from a previous era. With the advent of GPS and modern theodolites (total stations) it's all SSM's (Standard Survey Marks) now as line-of-sight isn't as important as it used to be. With differential GPS (2 GPS receivers, 1 set up on a known point, and 1 where-ever you like) you can accurately map to centimetre level these days.
Trust me, I'm a Surveyor!
- caughtatwork
- Posts: 17025
- Joined: 17 May 04 12:11 pm
- Location: Melbourne
- Contact:
Re: What's the difference between a trig point and a survey mark
If you find a TrigPoint which has a marker which says TRIGONOMETRICAL STATION then, sure. If you find a SSM, then nope. There are thousands of unlisted TP's in NZ
Re: What's the difference between a trig point and a survey mark
I had trouble working out what constituted a trig station when I was in NZ earlier this year. Unlike the hierarchy in Australia they describe their survey marks in terms of what "order" they fall into (see http://www.linz.govt.nz/data/geodetic-s ... ate-orders).
Does anyone know what counts as a trig in NZ?
Does anyone know what counts as a trig in NZ?
- caughtatwork
- Posts: 17025
- Joined: 17 May 04 12:11 pm
- Location: Melbourne
- Contact:
Re: What's the difference between a trig point and a survey mark
If it's got a plaque that says Geodetic Survey Mark and it's got a beacon, I'd say it's a TrigPoint.
- Richary
- 8000 or more caches found
- Posts: 4189
- Joined: 04 February 04 10:55 pm
- Location: Waitara, Sydney
Re: What's the difference between a trig point and a survey mark
I added one in Dunedin (at whatever the top of the mountain is where the TV transmitters are) when I was over for the mega. I also spotted another one by the side of the highway heading back to ChCh but didn't have a chance to pull over. That one was strange as it was in the middle of a big flat stretch and not on a hill (though the countryside was flat all around so it would have been visible for miles) but looked like a traditional Aussie trig with vanes etc.
- Dik:
- 500 or more caches logged
- Posts: 370
- Joined: 22 May 06 6:56 pm
- Location: Adelaide SA Garmin 60CSx
Re: What's the difference between a trig point and a survey mark
Well I always understood Australian trig points to be 1st order points. I.e. a 2nd order point is referenced to a 1st order etc. But it would appear in NZ they are called 0 order.Tyreless wrote:I had trouble working out what constituted a trig station when I was in NZ earlier this year. Unlike the hierarchy in Australia they describe their survey marks in terms of what "order" they fall into (see http://www.linz.govt.nz/data/geodetic-s ... ate-orders).
Does anyone know what counts as a trig in NZ?
A trig point is a point that has been defined to the highest order and other survey marks must be referenced by triangulation to 3 trigs. Lesser points may be created by referencing 3 points of higher order, but a reference back to the trig network is always possible.
Think of a trig point as a GPS satellite on the ground.
Think of lower order points like a multi geocache that is an offset from a GPS point but located where the GPSr can't see the sky, eg indoors, down a mine shaft, tunnel etc.
Re: What's the difference between a trig point and a survey mark
For those of you guys interested in trig points and SSM's etc. I found this cache while in the US of A recently. In a very cool town, St Augustine, America's first European settlement in Florida.
http://www.geocaching.com/geocache/GC1M ... c1535edbc8#
http://www.geocaching.com/geocache/GC1M ... c1535edbc8#