New Program - GSAK (Geocaching Swiss Army Knife)

Snuva · Post by **Snuva** » 29 March 06 4:51 pm

I have the same problem with new queries coming into GSAK; and GCA's having the problem too.

rippunzel · Post by **rippunzel** » 29 March 06 4:55 pm

Sorry Clive, looks like I was looking at the wrong entry in the .gpx file:

Will see what Groundspeak can come up with - glad

I'm not alone

Gunn Parker · Post by **Gunn Parker** » 22 April 06 1:51 am

Hi All
I have just updated to the lasted GSAK version, now I find I cannot run the macro the show caches in Google Earth.
I downloaded a new version of the macro and still get and error when running the macro.

Thanks

Gunn Parker · Post by **Gunn Parker** » 22 April 06 11:22 am

And now this morning I get the same error when logging a cache from gsak, any ideas Clyde?

Team Red Roo · Post by **Team Red Roo** » 22 April 06 11:39 am

Which version are you running Andrew - I have v6.6.0.50 and it all works fine for me

Gunn Parker · Post by **Gunn Parker** » 22 April 06 11:55 am

Hi wayne, I have just removed the latest version and gone back one, all is fine now, I'll try again later.
Andrew

Aushiker · Post by **Aushiker** » 26 April 06 10:54 am

Hi

I haven't updated to the new version so still running 6.5.2 Build=16, but getting an "Unable to establish connection with GSAK server" error message. Anyone else getting this problem? Solutions?

Andrew

setsujoku · Post by **setsujoku** » 26 April 06 1:07 pm

Aushiker wrote:Hi

I haven't updated to the new version so still running 6.5.2 Build=16, but getting an "Unable to establish connection with GSAK server" error message. Anyone else getting this problem? Solutions?

Andrew

you can go straight to the gsak web site and download the newest version from there.

If you go into the support forums there is a copy of the new beta version available as well

Aushiker · Post by **Aushiker** » 07 May 06 12:37 am

Hi

Getting a problem with GSAK not communitcating with my Garmin Geko 301 via a USB to Serial Connector. First and foremost this has worked since I got my Geko. Today it decided to not work. I reinstalled the drivers for the link. Set GSAK to COM12 which is the com port shown in the hardware profile and got a can't init. error mesage.

Fire-up Oziexplorer, set it to COM12 and bingo it communicates no problems with the GPSr.

Suggestions?
Andrew

HawMorFords · Post by **HawMorFords** » 15 May 06 11:40 am

G'day Folks

This question has probably been asked before but i couldn't find it ..... What is the likelyhood of GSAK being available for Pocket PC ? Perhaps even a watered down version if required ?

Thanks

ian-and-penny · Post by **ian-and-penny** » 15 May 06 1:09 pm

HawMorFords wrote:G'day Folks

This question has probably been asked before but i couldn't find it ..... What is the likelyhood of GSAK being available for Pocket PC ? Perhaps even a watered down version if required ?

Thanks

I use GPXSonar. It allows me to have GSAK(like) functionality on my PPC

riblit · Post by **riblit** » 20 May 06 2:15 pm

It appears the latest combination of gc.com changes may be affecting GSAK.

Could someone running GSAK on a computer without a Microsoft Development Environment installed check to see what happens when clicking on the Online Waypoint URL. Best to try without auto loggin on to gc.com

I get an error and the debugger opens on the line
map.setCenter(new GLatLng(lat, lng), 9);
in the javascript loadmap() function. Once I close the debugger GSAK aborts.

It seems effect only the browser window in GSAK.
Opening the cache page in ie doesn't produce the error, just the normal 'not logged in' page with nothing on it for an archived cache a page without coords for an active cache.

JackHenry · Post by **JackHenry** » 20 May 06 3:09 pm

I'm running Build 26 of 6.6.1 on a Windows XP SP2 machine. I logged out of GC.Com and tried your issue.
 
It worked OK. I got the page minus the usual 'logged in' information (coords etc)

 
Regards
John

ZED! · Post by **ZED!** » 20 May 06 3:15 pm

Build 50 / 6.6.0 on Win XP Pro. No problems encountered.

HawMorFords · Post by **HawMorFords** » 22 May 06 9:49 am

I wonder if someone could please give me a hand setting up a macro to import my PQs.... i'm not too flash at writing macros but have had a go at changing the one posted earlier in this thread but have not had any joy.

I have 5 PQs and generally move the zip file into a desktop folder.

Any help with this would be greatly appreciated.

Cheers