Oregon 450t - Won't start properly
- Agent Basil
- 2500 or more caches found
- Posts: 674
- Joined: 31 July 08 8:26 pm
- Location: Deakin, ACT
Oregon 450t - Won't start properly
I think it is trying to tell me something. We are off to Port Stephens tomorrow so I was loading the Oregon with a GPX file via the GSAK Export function. Everything worked well but when I fire up the Oregon, it gets to the half way mark of loading everything then swithes itself off. When I reconnect it to the PC, it gets to the same stage and falls over. Accordingly, I can't access any files via the PC to delete and start over. Is there a hard factory reset function which can be done without going through the menu system?
Re: Oregon 450t - Won't start properly
try for info here ==> http://garminoregon.wikispaces.com/Home
-
- 10000 or more caches found
- Posts: 1067
- Joined: 13 October 03 11:45 am
- Location: Travelling Australia using a Garmin Montana 650T
Re: Oregon 450t - Won't start properly
Take the SD card out and try again. Sometimes the SD becomes corrupt.
- Agent Basil
- 2500 or more caches found
- Posts: 674
- Joined: 31 July 08 8:26 pm
- Location: Deakin, ACT
Re: Oregon 450t - Won't start properly
Thanks guys.
Ian, no SD card installed.
Paul, brilliant resource, have deleted all my Tracks, Waypoints and GPX as per their nifty boot up trick, reloaded GPX, I can see it, Port Stephens here we come. Owe you a beer !
Ian, no SD card installed.
Paul, brilliant resource, have deleted all my Tracks, Waypoints and GPX as per their nifty boot up trick, reloaded GPX, I can see it, Port Stephens here we come. Owe you a beer !