Edit ECW files
-
- 10000 or more caches found
- Posts: 1067
- Joined: 13 October 03 11:45 am
- Location: Travelling Australia using a Garmin Montana 650T
Edit ECW files
I have some ecw mapping files that seem to have been scanned with too high DPI. When displayed in OziExplorer I have to zoom down to 33% to have a usable view on the screen.
Can anyone point me to some free software that can resize/resample these files?
Can anyone point me to some free software that can resize/resample these files?
Re: Edit ECW files
I use img2ozf
Re: Edit ECW files
Use map merge and put them together at the same time drop the pixel per inch rate, this will result in a small map, hope that helps
- The Explorer
- Posts: 153
- Joined: 20 August 04 8:48 pm
- Location: South West Western Australia
Re: Edit ECW files
Hi
Whats bad about having to zoom into 33%? If it wasnt 33% it would just be some other number. Only issue I could imagine with being scanned at "too high a resolution" should be file size which may affect performance of the mapping program on less high powered display units. Ozf is best for OziExplorer anyway (well CE/Android version..not so much PC version) so even if you dont change the actual resolution to get rid of the annoying number 33 it is best to convert to ozf as suggested.
Cheers
Greg
Whats bad about having to zoom into 33%? If it wasnt 33% it would just be some other number. Only issue I could imagine with being scanned at "too high a resolution" should be file size which may affect performance of the mapping program on less high powered display units. Ozf is best for OziExplorer anyway (well CE/Android version..not so much PC version) so even if you dont change the actual resolution to get rid of the annoying number 33 it is best to convert to ozf as suggested.
Cheers
Greg
-
- 10000 or more caches found
- Posts: 1067
- Joined: 13 October 03 11:45 am
- Location: Travelling Australia using a Garmin Montana 650T
Re: Edit ECW files
It's bad if what you expect to see at 100% is too pixellated to be of any use. Especially on a small netbook screen.The Explorer wrote:What's bad about having to zoom into 33%?
Yep, 100%The Explorer wrote:If it wasnt 33% it would just be some other number.
Re: Edit ECW files
what maps are you trying to use ? i have a HUGE resource of digital maps, might be able to help
-
- 10000 or more caches found
- Posts: 1067
- Joined: 13 October 03 11:45 am
- Location: Travelling Australia using a Garmin Montana 650T
Re: Edit ECW files
TopoMap SAMr Router wrote:what maps are you trying to use ? i have a HUGE resource of digital maps, might be able to help
Re: Edit ECW files
There's really no such thing as an ECW that has been scanned at to high a resolution, all the higher resolution does is increase the file size dependent on the coverage area. ECW's with 10cm pixels make thins look real good, just got to have the system to handle the file size.
- The Explorer
- Posts: 153
- Joined: 20 August 04 8:48 pm
- Location: South West Western Australia
Re: Edit ECW files
Hi, my point is just use zoom that suits. If you modified the image to achieve a lower resolution it would just mean the zoom level would be different i.e. not 33 but 100%..so what? End result the same. Why exactly is viewing the image at 33% to see what you want to see a problem? Maybe I dont understand the issue?ian-and-penny wrote:It's bad if what you expect to see at 100% is too pixellated to be of any use. Especially on a small netbook screen.The Explorer wrote:What's bad about having to zoom into 33%?
Yep, 100%The Explorer wrote:If it wasnt 33% it would just be some other number.
Cheers
Greg
-
- 10000 or more caches found
- Posts: 1067
- Joined: 13 October 03 11:45 am
- Location: Travelling Australia using a Garmin Montana 650T
Re: Edit ECW files
If you have a 100% image you can zoom out to 33% to see the bigger picture.
If you have to start off at 33% (because 100% is just a blocky pixellated mess) then there isn't much opportunity to zoom out any further. (Less than half the zoom levels available.)
If you have to start off at 33% (because 100% is just a blocky pixellated mess) then there isn't much opportunity to zoom out any further. (Less than half the zoom levels available.)
- The Explorer
- Posts: 153
- Joined: 20 August 04 8:48 pm
- Location: South West Western Australia
Re: Edit ECW files
Hiian-and-penny wrote:If you have a 100% image you can zoom out to 33% to see the bigger picture.
If you have to start off at 33% (because 100% is just a blocky pixellated mess) then there isn't much opportunity to zoom out any further. (Less than half the zoom levels available.)
Fair enough ..but initially you said "When displayed in OziExplorer I have to zoom down to 33% to have a usable view on the screen". Which suggested that 33% was fine but you didn’t like zooming out that far. Now you seem to be saying 33% is not good.
Also upon further consideration it seems your image has been scanned at too low a resolution if at 100% zoom it is pixelated, not too high a resolution as you initially suggested. There is no solution to this problem apart from rescanning the original image (or in the case of a digitally sourced/created image resaving from the original program) at a higher resolution.
Cheers
Greg