I have just published ga5962.
It should be a trig point but for some reason the drop down menu does not include Trig.
It could be something to do with I have taken a while to get this one out and had it stored as an unpublished trad.
Can you please trig it.
Please change virtual to trig
- SamWalkers
- 900 answers to the unknown mysteries of life
- Posts: 228
- Joined: 30 April 09 12:57 pm
- Location: CANBERRA
- caughtatwork
- Posts: 17015
- Joined: 17 May 04 12:11 pm
- Location: Melbourne
- Contact:
Re: Please change virtual to trig
No can do. TP's have a TP prefix. That can't be changed from the GA code.
I'd recommend an archive (or unpublished log), save the code for later and list a new TP type.
I'd recommend an archive (or unpublished log), save the code for later and list a new TP type.
- SamWalkers
- 900 answers to the unknown mysteries of life
- Posts: 228
- Joined: 30 April 09 12:57 pm
- Location: CANBERRA
Re: Please change virtual to trig
All done.
I think I have been caught like that before but worked it out.
Am I correct in thinking that there is no way to save a TP in draft? That a TP publishes when it is saved?
That would be to do with ownership of a trig cache remains with GCA.
I think I have been caught like that before but worked it out.
Am I correct in thinking that there is no way to save a TP in draft? That a TP publishes when it is saved?
That would be to do with ownership of a trig cache remains with GCA.